Home security audit, score your house in 5 minutes.
Answer 12 questions about your doors, deadbolts, strike plates, and smart-lock setup. Get a security score out of 100 and a prioritized fix list. No email, no sign-up, no data collection.
Last reviewed September 2026 · Swift Key San Diego
Most San Diego homes shipped from the builder with ANSI Grade-3 deadbolts and factory 3/4" strike-plate screws. Both are fine for interior doors and both fail quickly on a determined kick-in attempt. The gap between "builder-grade" and "actually secure" is usually a single service call and a modest hardware upgrade.
What does ANSI Grade 1 mean for break-ins?
It's the highest residential rating: a Grade 1 deadbolt survives ten strikes of 75 foot-pounds before failing, where a builder Grade 3 fails at two. That's the difference between a kick-in bouncing off and the door swinging open. If you're weighing specific hardware, our Schlage B60 vs. Kwikset forced-entry review breaks down which Grade 1 deadbolt resists drilling, sawing, and kick-ins best.
This audit identifies the gaps. It is a browser checklist, not an on-site walkthrough. Answer honestly. Nothing is sent to us unless you call (858) 400-4082 to be matched with an independent locksmith.
,
Your top 3 recommended fixes
Want a second opinion in person? Call (858) 400-4082 and we will match you with an independent locksmith. Ask them what they see on your doors and what they would charge. Swift Key does not offer free on-site assessments and does not set prices.
What does my score mean?
Referral coverage across San Diego County
The audit works anywhere, but the cost ranges are calibrated to San Diego County. Featured service areas:
Common questions about this audit
Who is this home security audit for?
San Diego County homeowners and renters who want a second opinion on whether their current locks, deadbolts, and entry hardware are adequate. The audit is quick and returns a score from 0 to 100 plus a prioritized fix list.
Is this a real audit or just a marketing quiz?
The score is an educational checklist based on published ANSI/BHMA hardware grades and common kick-in and cylinder failures. It is not a California Building Code inspection, a licensed audit, or a substitute for someone looking at your doors. Use it to decide what to ask a locksmith about.
What determines what a fix actually costs?
Hardware choice, door condition, and whether additional door-frame repair is needed all move the price. The audit tells you what drives the cost of each recommended fix so you know what to ask about when you call around. The locksmith quotes firm before any work starts.
Do I need to give you my email to see results?
No. The audit runs entirely in your browser, no email, no sign-up, no data leaves the page. If you want help with a recommended fix, call (858) 400-4082 and we will match you with an independent locksmith.
What if my score is low?
A low score means there are high-impact fixes available, usually a mix of strike-plate reinforcement (one of the cheaper upgrades in parts), rekey or deadbolt upgrades, and basic smart-home integration. Scope and timing depend on the locksmith and the doors, not on this page.
Is a Grade-1 deadbolt really necessary in San Diego?
Not for every home. Inland tract homes in safe neighborhoods with neighbors watching typically do fine with Grade-2. Coastal, rural, or recent-break-in-area homes benefit more from Grade-1. The audit factors in your neighborhood risk when recommending.
What does ANSI Grade 1 mean for break-ins?
ANSI Grade 1 is the highest residential deadbolt rating under ANSI/BHMA A156.36. A Grade 1 deadbolt survives ten strikes of 75 foot-pounds before failing, where a builder-grade Grade 3 lock fails at two. In plain terms, a Grade 1 lock resists the kind of kick-in that snaps a Grade 3 strike plate on the first or second hit. See our full Schlage B60 vs. Kwikset forced-entry review for which specific Grade 1 deadbolt performs best against drilling, sawing, and kick-ins.
Schlage vs. Kwikset vs. Yale, which deadbolt is most secure?
Schlage B60 and Kwikset SmartKey Security both carry ANSI Grade 1 ratings in their top residential lines, and Yale Assure Lock 2 matches Grade 1 in its security-focused models. The real difference shows up in forced-entry testing, not the spec sheet: Schlage B60 has the strongest published resistance to drilling and sawing attacks, Kwikset SmartKey resists bump-and-pick attempts better, and Yale Assure trades some physical hardening for smart-lock convenience. Our Schlage B60 vs. Kwikset comparison has the full breakdown by attack type.
Ready to close the gaps the audit found?
Call (858) 400-4082 to be matched with an independent locksmith. They confirm availability and quote before any work starts.